Description

Adopt inhalation type sand blasting, that is, the use of compressed air in the high-speed flow of the gun to form a negative pressure to produce the effect of ejection, the cyclone separator storage tank of sand material through the sand pipe into the gun, and then with the compressed air flow from the nozzle high-speed spray to the surface of the workpiece to achieve the purpose of sand blasting processing.

Technical Parameters

*Note: The thickness of machine steel plate is 5~8mm, air pressure is 0.6-0.8MPa

Areas of Application

Suitable for small and medium-sized workpiece automation sandblasting, such as drills, screwdrivers, screws, small gears, sleeves, aluminum die-casting products, automobile and motorcycle parts, hardware products, and other small parts processing or casting parts (aluminum and zinc die-casting, forging parts), mold parts, such as other metal 10-30 cm or so of the pipe sandblasting.

Product Features

1. This machine is specialized in rolling sand blasting for small workpieces. The rolling speed can be digitally controlled by frequency conversion, which makes the sand blasting speed fast, the processing quality stable and the operation simple.

2. The swinging arc of the gun can be adjusted. The gun and gun holder can be placed according to the size of the workpiece and can be rotated so that various workpieces can be sandblasted.

3. Equipped with dust collector and cyclone separator, which can separate sand material and dust, and reduce the consumption of sand material and environmental pollution. Sand material can be recycled automatically.

4. This machine is equipped with 6 sets of spray guns, each gun has individual control and 1 blowing gun, which can reduce the sand material attached to the workpiece after processing.

Usage

● Equipment Installation Connect the main unit of the equipment to the dust removal box.

● Power access The power supply of this equipment is 380V three power supply, access line for three five-wire 4 square or more cable.

● Gas source access The normal working air pressure of this equipment is 0.6-0.8MPa, gas consumption flow rate of more than 6 cubic meters per minute, the external gas pipe shall not be less than 2 inches, to ensure that the gas supply is sufficient. Supply into the gas source to ensure that the dry, so as not to damage the machine parts and abrasive moisture, resulting in blocking the bucket or sand pipe blockage, affecting the normal use. Fourth, debugging and use of the correct access to the power supply gas source before debugging.

● Before starting the equipment, please follow the requirements below.

● Start the dust blower, please be sure to check whether the dust blower is clockwise rotation (if not clockwise rotation will directly lead to the bottom of the machine sand recycling can not be above the circular cyclone), add abrasive, the first time to add abrasive 25KG or so, add abrasive must be turned on the dust blower, and abrasive must be slowly poured into the machine bin, so as not to pour the abrasive too quickly directly blocked at the bottom of the machine and the circulation is not The cyclone on top of the machine.

● Put the products to be processed into the warehouse, the amount of products to be put into the warehouse should not exceed 1/3 of the depth of the crawler (the carrying capacity of the crawler is about 180KG), so as to avoid poor blasting effect, the crawler is in a positive rotation for the working state of the machine when blasting (the products are tumbling inside), and the crawler in a reversed rotation for the working state of the products when blasting is completed and discharging the products.

● Adjust the spray gun to the appropriate position, the height of the gun muzzle from the product is about 10CM, the spray gun is aimed at the lower part of the warehouse, the spray gun is properly separated (bracket spacing of about 3CM) to avoid airflow hedge, affecting the effect.

● Sand blasting time setting, time meter appliance in the work of the suitable shall not go to adjust the sand blasting time, this will directly burn out the time meter appliance, general products normal sand blasting time for 8-12 minutes or so, the customer can according to their own product needs to adjust to the appropriate sand blasting time.

● The dust collector needs to be automatically vibrated for half an hour after the end of the daily use of the equipment before it can be shut down (it has to be in the state of the dust collector fan off), to make sure that the dust inside the dust collector is cleaned up.