Becoming a world leading supplier of shot blasting cleaning equipment
Romania Cyclone Dust Collector
Category:
Product Description
Descriptive
It is a kind of gas-solid separation equipment used in the industrial field, which mainly separates dust and gas by rotating airflow.
Basic principle: Cyclone dust collector utilizes the principle of centrifugal force, the dusty gas enters into the dust collector through the tangential direction, and the airflow forms a high-speed rotating motion inside the dust collector. Due to the centrifugal force generated by the rotating gas flow, the heavier dust particles are thrown toward the wall, lose kinetic energy and then fall along the wall into the dust collection hopper, thus separating from the gas flow. The cleaned gas is discharged from the center.
Main features
1. **Simple structure**: no moving parts, easy maintenance.
2. **Strong adaptability**: suitable for high temperature and high concentration of dusty gas.
3. **Higher efficiency**: high capture efficiency for dust particles with a diameter greater than 5 microns.
4. **Low cost**: lower manufacturing and operating costs.
5. **Small footprint**: compact equipment, flexible installation.
Application Areas
Cyclone dust collectors are widely used in the following industries:
● Cement manufacturing
● Chemical production
● Metallurgy
● Electricity production
● Woodworking
● Grain processing
Maintenance
1. **Periodic inspection**: regularly check the sealing and wear of each part of the equipment.
2. **Cleaning of accumulated dust**: Clean the accumulated dust in the dust collection hopper regularly to prevent clogging.
3. **Monitoring of operating parameters**: Monitor the pressure loss and the volume of gas handled to ensure normal operation of the equipment.
Technical Parameters
Spec.Dust Collector | Flue gas treatment/ea | Dust Diameter | Efficiency | Resistance(Pa) | Cyclone Material | Manufacture Craft of Cyclone | Tem Resistance |
480 | 3000 | >10um | 92% | 700 | Ceramic | Machine | <300℃ |
360 | 1500 | >10um | 80-90% | 700-900 | Ceramic | Manual/machine | <300℃ |
290 | 750 | 5-10um | 85-92% | 900 | Ceramic | Manual/machine | <300℃ |
220 | 500 | 3-10um | 85-95% | 1100 | Ceramic | Manual | <300℃ |
Tangential | 500 | 3-10um | 90-95% | 1100 | Ceramic | Manual | <300℃ |
707 Cast-iron | 500 | 3-10um | 90-95% | 1100 | Cast-iron | Die making | <300℃ |
High-tempurature resistance | Manufacture with different types of cyclones and treated with thermal insulation. | 300-650℃ | |||||
Dry Desulfurization | Manufacture with different types of cyclones,and filled with activated carbon layer.It can absorb H₂S in the flue gas. | ||||||
: next page