Becoming a world leading supplier of shot blasting cleaning equipment
Jordan Grinding Wheel Sand Mixer
Category:
Product Description
Descriptive
Grinding wheel sand mixer is a specialized equipment for mixing sand, clay, lime and other materials, which is commonly used in construction, metallurgy, chemical industry, ceramics and other industries. The equipment rolls, crushes and mixes the various materials in the mixing tank through the grinding wheel, so that the various materials are fully mixed to achieve the effect of uniform mixing.n up the accumulated dust to maintain the filtration efficiency of the equipment.
Product Features
1. High-efficiency mixing: the grinding wheel sand mixer adopts the dual role of grinding and mixing, which can quickly and evenly mix various materials and improve production efficiency.
2. Simple structure**: the equipment has a reasonable structural design, easy to operate and maintain, low failure rate and long service life.
3. Wide range of application**: It is suitable for mixing a variety of granular and powdery materials, especially widely used in brick and tile factories, refractory factories and ceramic factories.
4. Environmental protection and energy saving**: the equipment runs smoothly, with low noise, low energy consumption and friendly to the environment.
Working Principle
When the grinding wheel sand mixer is working, the motor drives the grinding wheel to roll in the mixing tank through the transmission system. The materials are continuously rolled, sheared and mixed under the action of grinding and stirring of the milling wheel until the effect of uniform mixing is achieved. The whole process is simple, efficient and easy to control.
Application Examples
Grinding wheel sand mixer is widely used in mixing raw materials in brick and tile factories, mixing powder in refractory factories, and blending clay in ceramic factories. In these applications, the Grinding Wheel Sand Mixer is generally recognized by users for its high efficiency, uniform mixing effect and durability.
Technical Parameters
Item | Parameters |
Feedstock | Typically 500 kg (0.4 m3) per dosage |
Mixing time | Mixing time is 3-7 minutes |
Efficiency of production | The production rate is 10,000-13,000 kg/hour |
Tray diameter | The disk diameter is 1820 mm |
Grinding Wheel(Diameter×Width) | The diameter of the mill wheel is 740 millimeters and the width is 240 millimeters |
Overall transmission ratio | The total transmission ratio is 56.46 |
Mill pressure | A mill wheel has a pressure range of 0-2500 N |
Matching power | The matching power is 15 kW |
Spindle speed | The spindle speed is 25 rpm |
Overall dimensions | Overall dimensions are 2082 x 1882 x 1775 mm |
Gross theoretical weight | The theoretical gross weight is 2,300 kilograms |
: next page