Description

Adopt inhalation type sand blasting, that is, the use of compressed air in the high-speed flow of the gun to form a negative pressure to produce the effect of ejection, the cyclone separator storage tank of sand material through the sand pipe into the gun, and then with the compressed air flow from the nozzle high-speed spray to the surface of the workpiece to achieve the purpose of sand blasting processing.

Technical Parameters

Model: Q0250Y-I-JX

Tank Capacity: 0.49 (m³)

Compressed Air Pipe Diameter: 1½

Operating Air Pressure (MPa): 0.5–0.7

Spray Rate (kg/h): 1 × (1800–2200)

Air Consumption (m³/min): 6.1 (depending on nozzle diameter)

Control Method: Pneumatic; Wireless (Please specify this option when ordering)

Blasting Hose Length (m): Outer diameter 49, inner diameter 32; 10 m standard

Dimensions (Tank Diameter x Height) (mm): 800 x 1800

Model: Q0250-II-LX

Tank Capacity: 1 (m³)

Compressed Air Pipe Diameter: 1½

Operating Air Pressure (MPa): 0.5–0.7

Spray Rate (kg/h): 1 × (1800–2200)

Air Consumption (m³/min): 6.1 per gun (depending on nozzle diameter)

Control Method: Wireless or Pneumatic (customer-specified)

Blasting Hose Length: Outer Diameter 49, Inner Diameter 32; Standard Length 10 meters

Dimensions (Tank Diameter × Height) (mm): 900 × 2400

Model: Q0250-II-JX

Tank Capacity: 1 (m³)

Compressed Air Pipe Diameter: 1½

Operating Air Pressure (MPa): 0.5–0.7

Spray Rate (kg/h): 1 × (1800–2200)

Air Consumption (m³/min): 6.1 per gun (depending on nozzle diameter)

Control Method: Pneumatic; Wireless (Please specify this option when ordering)

Blasting Hose Length (m): Outer diameter 49, inner diameter 32; 10 m standard

Dimensions (Tank Diameter × Height) (mm): 1000 × 2200

Model: Q0250-I-LX

Tank Capacity: 0.71 (m³)

Compressed Air Pipe Diameter: 1½

Operating Air Pressure (MPa): 0.5–0.7

Spray Rate (kg/h): 1 × (1800–2200)

Air Consumption (m³/min): 6.1 per gun (depending on nozzle size)

Control Method: Wireless or Pneumatic (customer-specified)

Blasting Hose Length: Outer Diameter 49, Inner Diameter 32; Standard Length 10 meters

Dimensions (Tank Diameter × Height) (mm): 800 × 2200

Model: Q0250-I-JX

Tank Capacity: 0.49 (m³)

Compressed Air Pipe Diameter: 1½

Operating Air Pressure (MPa): 0.5–0.7

Spray Rate (kg/h): 1 × (1800–2200)

Air Consumption (m³/min): 6.1 (depending on nozzle diameter)

Control Method: Pneumatic; Wireless (Please specify this option when ordering)

Blasting Hose Length (m): Outer diameter 49, inner diameter 32; 10 m standard

Dimensions (Tank Diameter x Height) (mm): 800 x 1800

*Note: The thickness of machine steel plate is 5~8mm, air pressure is 0.6-0.8MPa

Areas of Application

· Removes rust and scale from metal surfaces and extends the life of coatings

· Sandblasting of automotive parts, motorcycle parts, electrical components, molds, plastics, and other items to achieve a matte finish and enhance product quality

· Sandblasting of glass products to achieve a frosted finish; capable of creating various patterns to enhance the product’s decorative appeal

· Cleaning of rough surfaces on workpieces such as forgings, castings, welded parts, and heat-treated components to achieve a sandblasted, rough-surface finish

Product Features

1. Easy to operate Easy to maintain

2. Low failure rate Extremely long service life

3. Low cost High efficiency

Q26 Sandblasting Machine Operating Instructions

<I>Pre-Operation Preparation

① Prepare the air supply and abrasive material required for the sandblasting machine in accordance with specifications.

② Check that all connections on the sandblasting machine are secure and reliable.

③ Connect the main air supply and secure the sandblasting tank; connect the control air hose and secure it to the sandblasting hose, ensuring all connections are tight and secure.

④ Pressure Adjustment and Leak Check: Before turning on the air supply, ensure all pressure gauges read zero. Turn on the air supply to check the pressure, inspect all connections for air leaks, and verify that the operating pressure remains stable.

<II> Operating Procedure and Precautions

Load the abrasive material, taking care not to overfill the tank—fill to approximately 3/4 of its capacity. After loading the abrasive, close the pressure relief ball valve, open the air supply ball valve to pressurize the tank, and check for air leaks or potential hazards. The operator must wear protective gear, activate the control switch, and start the sandblasting process. When the abrasive is depleted, close the air supply ball valve, open the pressure relief ball valve to depressurize the sandblasting tank, and reload the abrasive. (Note: The handwheel can be used to adjust the sandblasting flow rate).

<III> Main Technical Parameters

① Volume: 0.26 (m³)

② Compressed air hose diameter: 1½

③ Operating air pressure: 0.5–0.73 (MPa)

④ Air consumption (m³/min): 6.1 (depending on nozzle diameter)

⑤ Sandblasting hose (inner diameter 32, outer diameter 49), length 15 meters (length can be customized)

⑥ Dimensions: Tank diameter 600 mm, tank height 1400 mm

⑦ Machine weight: Approximately 240 kg

<IV> Equipment Maintenance and Troubleshooting

① Pay attention to any leaks during operation; if detected, repair immediately

② Before operation, inspect the sandblasting hose for damage, air leaks, cracks, kinks, or signs of aging, and replace it promptly

③ When the machine is not in use for an extended period, drain the abrasive to prevent moisture absorption and caking. Remove the sandblasting hose and store it properly in a dry location

④ As the sandblasting machine is a pressure vessel, it must undergo regular pressure vessel inspections

Troubleshooting Chart for Sandblasting Machines

List of Wear Parts

Name & Specification	Image	Name & Specification	Image
Sealing Ring   Q26-3-1		Regulator Valve Core   Q26-3-5
Nozzle Connector   Q26-3-2		Sandblasting Hose   Q26-3-6
Wear-Resistant Liner   Q26-3-3		Nozzle   Q26-3-7
Air Valve Cloth-Reinforced Rubber Pad   Q26-3-4		Cloth-Reinforced Rubber Gasket   Q26-3-8